Channel 8 Channel (2 channel x 4) Minimum Speaker load Capability 4 Ohm BTL Connection Yes Speaker Output Terminal 4 (Euroblock) Audio Input Terminal RCA: 4 Audio Output Terminal RCA (2-ch through out): 4 Trigger In / Out 4/4 Remote In / Out 1/1 Rated Output Power (1 kHz, 0.9% THD, 2ch driven) Normal (4 / 8 ohms): 90 / 50 W, Bridge (8 ohms): 100 W Rated Output Power (1 kHz, 0.9% THD, 1ch driven) Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms):200 W Dynamic Power (20 Hz-20 kHz, 0.08% THD, 2ch driven, 20 ms burst) Normal (4 / 8 ohms): 80 / 40 W, Bridge (8 ohms): 150 W Dynamic Power (1 kHz, 0.9% THD, 2ch driven, 20 ms burst) Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms): 200 W Dynamic Power (1 kHz, 0.9% THD, All ch driven, 20 ms burst) Normal (4 / 8 ohms): 80 / 50 W, Bridge (8 ohms):170 W Maximum Effective Output Power [1-ch driven, 1 kHz, 10% THD] Normal (4 / 8 ohm):130 / 65 W, Bridge (8 ohm): 260 W Total Harmonic Distortion [SP OUT, 20 Hz-20 kHz, 25 W, 8 ohm] 0.04% Frequency Response [1 kHz + 0 / -3 dB] SP OUT AUX IN: 5 Hz-40 kHz Signal to Noise Ratio [SP OUT AUX IN] 108 dB Maximum Input Signal [PRE OUT L / R, 0.9% THD] 1 V Gain [SP OUT 1 V Input] 25.8 dB Input Sensitivity [1 W Power, 8 ohm] 150 mV, [MAX (50W) Power, 8 ohm] 1.0 V Power Consumption 130 W, [All Zone On] No Signal Condition: 32 W, [All Zone Off] Audio Sense On: 14.8 W Standby Power Consumption Audio Sense Disable: 0.3 W, Audio Sense Enable / Mode Standby: 0.5W Power Management (Auto Power Standby) Yes (On / Off) Dimension (W × H × D) mm [Table Top Mount with Adhesive Feet] 17-1/4” x 1-3/4” x 17-3/8”, [Table Top Mount with Adhesive Feet and Faceplate] 17-1/4” x 1-3/4” x 17-7/8”, [Rack Mount] 18-7/8” x 1-3/4” x 17-3/8”, [Rack Mount with Faceplate] 18-7/8” x 1-3/4” x 17-7/8” Weight 13.2 lbs