# Common Featers and Specs
# Selectable Channel Mode 1 :3 stereo, 35 watts/ch
# Selectable Channel Mode 2 :1 stereo, 70 watts/ch bridged or 1 stereo, 35 watts/ch and 1 stereo 80 watts/ch bridged
# Selectable Channel Mode 3 : 3 mono, 80 watts/ch bridged
# IR controlled level, balance and mute for each channel pair? 635 Only
# Common input buss individually selectable for each stereo amp? 635 Only
# On/Off control of each stereo amp: 635 IR and DC voltage/ 635X Main power only
# Low Impedance Capability 4 Ohm
# Auto Protection Each channel is protected separately if a short or very low impedance is detected at the speaker terminals. Operation is restored after the short is removed.
# Rack Mountable 2 x 19" rack spaces
# Multi-color LED's, one per stereo amp indicate Power (P), Mute (M) and High Level (H) : 635 3-P, M and H/ 635X 3-P and H
# Requires RC68+ Programmer for IR control 635 Only
# Power Output Rated continuous power, each channel: 8 ohms 35 watts (all channels
# simultaneously driven, 20 Hz to 20kHz at rated THD, 8 ohms)
# Short Term Continuous Power Each channel: 8 ohms, 55 watts (2 channels drive, 1 kHz, at rated THD) or 4 ohms, 60 watts
# Bridged Power Output Each pair: 8 ohms, 150 watts (Short term continuous, one pair driven, 1 kHz, at rated output power)
# THD Rated THD < 0.08%, Damping Factor: (@ 50Hz, 8 ohms, rated power) > 100,
# S/N Ration: A-Weighted (ref. to rated power) > 96dB
# Input Sensitivity 0.2V to 3.3V
# Remote Trigger Voltage +5 to +30VDC
# Power Supply 120VAC, 60Hz; 240VAC, 50Hz (European version)

* PA 635 6 X 35 Watt Amplifier
* Selectable Channel Modes
* IR controlled level, balance and mute
* Local or Common Buss
* IR and DC Voltage Controlled
* Low Impedance Capability
* Auto Protection
* Rack Mountable
* Front panel status LED's