Selectable Channel Mode 1: 6 stereo, 35 watts/ch : 3 stereo, 35 watts/ch
Selectable Channel Mode 2 : 4 stereo, 35 watts/ch and 1 stereo, 70 watts/ch bridged
Selectable Channel Mode 3 : 2 stereo, 35 watts/ch and 2 stereo, 80 watts/ch bridged
Selectable Channel Mode 4 : 3 stereo, 80 watts/ch bridged
IR controlled level, balance and mute for each channel pair? 1235 Only
Common input buss individually selectable for each stereo amp? 1235 Only
On/Off control of each stereo amp : 1235 IR and DC voltage/ 1235X Main power only
Low Impedance CapabilityEach amplifier is 4-ohm rated. This means two pair of 8-ohm speakers can be driven safely in each zone.
Auto Protection Each channel is protected separately if a short or very low impedance is detected at the speaker terminals. Operation is restored after the short is removed.
Rack Mountable 3 x 19" rack spaces
Multi-color LED's, one per stereo amp indicate Power (P), Mute (M) and High Level (H) 1235 6-P, M and H 1235X 6-P and H
Requires RC68+ Programmer for IR control 1235 Only
Power Output Rated continuous power, each channel: 8 ohms 35 watts (all channels simultaneously driven, 20 Hz to 20kHz at rated THD, 8 ohms)
Short Term Continuous Power Each channel: 8 ohms, 55 watts (2 channels drive, 1 kHz, at rated THD) or 4 ohms, 60 watts
Bridged Power Output Each pair: 8 ohms, 150 watts (Short term continuous, one pair driven, 1 kHz, at rated output power)
THD Rated THD < 0.08%, Damping Factor: (@ 50Hz, 8 ohms, rated power) > 100
S/N Ration: A-Weighted (ref. to rated power) > 96dB
Input Sensitivity 0.2V to 3.3V
Remote Trigger Voltage +5 to +30VDC
Power Supply 120VAC, 60Hz; 240VAC, 50Hz (European version)

PA 1235 12 Channel 35 Watts Per Channel Amplifier
* Selectable Channel Modes
* IR controlled level, balance and mute
* Local or Common Buss
* IR and DC Voltage Controlled
* Low Impedance Capability
* Auto Protection
* Rack Mountable
* Front panel status LED's
* Requires RC68+ Programmer for IR control